3.2 UART and SPI Interface
The module provides one 2-wire UART interface. As the UART interface supports signal control through
standard modem handshake, Software commands are entered and serial communication is performed through the
UART interface.
The baud rates supported are shown below: 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,
38400 bps, 57600 bps, 115200 bps, 230400 bps, 460800 bps, 921600 bps, 2764800 bps.
Table 3-3 UART interface signals
Pin No.
Pin Name
P17
CP_UART_TX
P15
CP_UART_RX
Figure 3-2 Recommended connection of the UART interface in the module with the host
In addition, the module provides a SPI interface.
Ta
e 3
int
rfa
bl
-4 SPI
e
ce
Pin No.
Pin Name
R11
CP_SPI_MISO
R09
CP_SPI_MOSI
Q12
PI_C
CP_S
Q10
CP_SPI_CSN
Figure 3-3 Recommended connection of the SPI interface
© SAMSUNG Electronics Co., Ltd. Confidential & Proprietary
Pad Type
O
I
signals
Pad Type
O
I
K
I
L
I
Description
UART transmit data output for debug
UART receive data input for debug
Description
SPI interface data output
SPI interface data input
SPI interface clock
SPI interface chip select
Typ. (V)
1.8
1.8
Typ. (V)
1.8
1.8
1.8
1.8
31 / 79