Hardware Guide
4.7 PCB Recommendation
This chapter provides a guide for optimizing RF line.
Table 4-7 Recommend RF guide
Not recommend
-
RF Signals and PCIE line are not
Isolated and it will cause cross talk.
-
-
RF Signals are not shielded with GND.
There are not GND Via next to the
signal lines.
causes High insertion loss.
-
RF Signals and too many digital/analog
lines are not
Impedance mismatch)
-
There are line width discontinuity and
Impedance mismatch.
mismatch causes High insertion loss
© SAMSUNG Electronics Co., Ltd. Confidential & Proprietary
This Impedance mismatch
isolated.(Cross talk and
This Impedance
Recommend
Layer 1
Layer 2
Layer 3
53 / 79