Hardware Guide
5.4 Electrical Features of Application Interfaces
Table 5-3 Electrical features of Digital Pins (GPIO/PCM/UART/SPI/SIM/Control GPIO)
Parameter
V
V
V
V
5.5 Power Supply Features
5.5.1 Input Power Supply
Table 5-4 lists the requirements for input power of the NAD LGA module.
Table 5-4 Requirements for input power
Parameter
VPH_PWR
The minimum voltage of VBAT can extend to 3.6 V, under this condition, only ensure the module will not
restart, but the characteristics cannot be guaranteed.
Figure 5-1 Power supply during burst emission
Table 5-5 Requirements for input current
Power
VBAT
© SAMSUNG Electronics Co., Ltd. Confidential & Proprietary
Description
Logic hi
h-level input voltage
g
IH
Logic low-level input voltage
IL
Logic hi
h-level output
g
OH
voltage
Logic low-level output voltage
OL
Min.
4.0
The VBAT minimum value must be guaranteed during the burst (with 2.8 A Peak in GPRS or
GSM mode).
Peak (GSM 1 slot)
2.8 A
Min.
0.7 x DVDD
–0.3
0.8 x DVDD
VSS
Typ.
Max.
4.2
4.4
Normal (WCDMA)
1.4 A
Max.
Unit
DVDD + 0.3 V
0.3 x DVDD
V
DVDD
V
0.2 x DVDD
V
Ripple
Unit
0.05
V
Normal (LTE)
1.4 A
56 / 79