Starting Up The Projector - BenQ Portable Series User Manual

Starting up the projector

If you are starting up the projector for the first time, it is suggested that the projector is within range of a wireless access point (e.g. a router) with a stable Internet
connection as some optional steps during the setup process require Internet access.
1. Install the provided ATV dongle into the ATV dongle port. See
2. Charge the battery or supply power to the projector as indicated in
3. Press the power button
I
I
• When supplying power directly to the projector please use the supplied power cable to avoid possible dangers such as electric shock and fire.
• Prior to pairing the remote control to your projector you must ensure that your remote control is in range of the projector's IR sensor. See
range on page 25 for more details.
• Powering on via the remote control will not work if you have not completed the setup wizard procedure or if the projector's battery level is below 5%.
on the projector for 3 seconds or remote control for 1 second. The power LED flash a breathing green pattern.
Installing the ATV dongle on page 30
Charging the battery on page
3 seconds
33
for details.
32.
1 second
Remote control effective