Parental Control; Installation - BenQ Portable Series User Manual

Parental Control

To access the Parental Control menu, you must first set a password. Once the password is set, you may configure the following items.
Item
Auto Power Off Enables/Disables the automatic shutting off of the projector after the amount of time selected in the Timer Setting field.
Timer Setting Allows you to sets the amount of time in hours and minutes after which the projector automatically powers off.
Change System
Allows you to change the system passcode.
Passcode

Installation

The following table describes the items available in the Installation menu:
Item
Projector
Chooses the position in which the projector is installed. See
Position
Allows you to further configure the projector's auto focus function. Options include: Real Time Adjustment and Sensitivity.
Auto Focus
Geometry
Allows you to select which type of image adjustment you want to configure. Options include: Keystone and Corner Fit.
Once you select a type of image adjustment use the field below to make your adjustments.
Correction
Keystone
Allows you to adjust the type of image adjustment in the Geometry Correction field. See
Setting / Corner
Corner Fit on page 41
Fit Setting
Displays the test pattern grid, which helps you adjust the image size and focus to check if the projected image is free of
Test Pattern
distortion.
Options and descriptions
Options and descriptions
for more details.
Choosing a location on page 28
61
for more details.
Correcting keystone on page 40 and