Sony MVS-6000 User Manual page 102

Command name
Plug-In Editor Enbl
Inhibit Set
Inhibit All Clear
a) For the safe title on/off commands (from ME1 PGM1 ST-ME1 PGM4 ST to AUX1 ST-AUX48
Assigning a menu shortcut to a memory recall button
1
2
3
4
To abandon the process of menu shortcut assignment
In the Prefs/Utility >Utility Module Assign menu, press [Menu Shortcut].
This exits the menu shortcut assignment mode.
102
Setting Button Assignments (Prefs/Utility Menu)
a) Function
Enable/disable operation from an
editing keyboard
Inhibit cross-point button
Clear all cross-point button inhibit
settings
ST), the name of the assigned output signal is shown.
Referring to the procedure up to step 3 on "Assigning a Function to a
Memory Recall Button in the Utility/Shotbox Control Block (MKS-8033
Utility/Shotbox Module, Option)" (page 98), select [Menu Shortcut].
The memory recall buttons in the utility/shotbox control block flash
orange.
Using any of the following methods, display the menu to which you want
to make a shortcut.
• In the menu control block, press the relevant top menu selection button,
then select VF and HF.
• Press the menu page number button in the upper left corner of the menu
screen, then enter a menu number from the numeric keypad window.
• Press a particular control panel button twice in rapid succession.
In the utility/shotbox control block, select the bank, and press the button to
which you want to assign the shortcut.
The menu screen goes back to the Prefs/Utility >Utility Module Assign
menu, and the selection is reflected in the status area.
The buttons in the utility/shotbox control block flash.
Repeat steps 2 and 3 as required, to assign all desired menu shortcuts to
the buttons in the utility/shotbox control block.
Button status
Lit green Lit orange
Enabled Disabled
Can be set only When the function
while pressed (lit) is assigned
Can be set only When the function
while pressed (lit) is assigned