Sony MVS-6000 User Manual page 251

Icon Title Message
HDD Failure.
Format HDD device is busy.
In order to complete HDD
format, System needs to be
restarted and formatted again.
System will be restarted, then
please execute HDD format
again.
HDD Success!!
Format System will be restarted.
Initial Initializing now...
Read
Install No Task.
Select a package on the list.
Install (1) Please select the MKS-
8010A package on the list
(2) Please select the MKS-
8010 package (not MKS-
8010A) on the list.
Some files are skipped.
Not Found.
The software package does not
exist on the removable disk.
Install All processes have succeeded. 7316.10: Engineering Setup >System >Install/
Description
7317: Engineering Setup >System
>Maintenance
In the above menu, the hard disk formatting
procedure failed.
If the hard disk is functioning correctly, or in
some cases when there is damage to the disk,
it may not be possible to format the disk
correctly in a single attempt. In such cases, it is
necessary to restart the system, and then carry
out formatting again.
Press [OK] to restart the system.
7317: Engineering Setup >System
>Maintenance
In the above menu, the hard disk formatting
procedure completed successfully.
Press [OK] to restart the system.
This popup message appears during menu
startup, while system information is being read
in.
7316.10: Engineering Setup >System >Install/
Unit Config >Install
In the above menu, the package for installation
was not selected. Select a package to be
installed.
7316.10: Engineering Setup >System >Install/
Unit Config >Install
In the above menu, the menu software
installation package does not match the model
on which it is to be installed.
(1) When the MKS-8010 installation package is
selected on the MKS-8010A
(2) When the MKS-8010A installation package
is selected on the MKS-8010
7316.10: Engineering Setup >System >Install/
Unit Config >Install
In the above menu, some program files were
not installed, for example because the
hardware is not present. Check the skipped
files against the hardware configuration, to
confirm that the installation was completed
correctly.
7316.10: Engineering Setup >System >Install/
Unit Config >Install
In the above menu, the software package to be
installed was not found. Check that the memory
card is correctly inserted, and try the installation
once more.
Unit Config >Install
In the above menu, the installation procedure
completed successfully.
251
Error Messages