Sony MVS-6000 User Manual page 63

The left side of the status area shows region selection buttons; the upper
part of the right side shows a list of regions assigned to region selection
buttons, and the lower part shows a list of assignable regions.
2
Press the indication of the button for the assignment.
The button you pressed appears in reverse video.
3
Using any of the following methods, select one of the four regions for the
setting.
• Press directly on the list in the upper part of the right side.
• Press the arrow keys to scroll the reverse video cursor in the list in the
upper part of the right side.
• Turn the knob.
Knob Parameter
1 Button Assign Selection to which setting
4
Using any of the following methods, select the region to be assigned.
• Press directly on the list in the lower part of the right side.
• Press the arrow keys to scroll the reverse video cursor in the list in the
lower part of the right side.
• Turn the knob.
Knob Parameter
2 Region
5
Press [Set], to confirm the selection.
This assigns the region to the region selection button in the numeric
keypad control block.
Note
Only regions assigned here can be used for keyframe or snapshot recall.
If an M/E bank is not assigned to a region selection button in the numeric
keypad control block, the M/E Flexi Pad control block cannot be used to recall
a snapshot.
To return the region assignment to the factory default state
In the Panel >Config >10 Key Region Assign menu, press [Default].
This returns the assignment of region selection buttons in the numeric keypad
control block to the factory default state.
Adjustment
applies
Adjustment
Region selection
Overall Control Panel Settings (Config Menu)
Setting values
1 to 4
Setting values
1 and upwards
63