M20013 REL-0000 (2103)
Configuration button
Overview of the Configuration button
The
tabs if a tethered sensor is attached:
•
•
Note: These tabs offer you various settings to configure
the Smart Manometer and each sensor.
Notification about unsaved settings
It displays a
changed a setting and you have not yet saved the setting.
Passwords
Overview of passwords
Passwords are never required to use a Smart Manometer or any
sensor.
The passwords are turned off when the Smart Manometers
▪
and sensors are shipped.
Each device can have its own unique 16-character password.
▪
You may use from 1-16 characters: letters, numbers, or
symbols, and uppercase and lowercase.
An internal sensor and a tethered sensor have their own
▪
separate passwords.
Each device can have its password turned on or turned off
▪
independently from any other tethered sensor.
▪
HHP400 Suite retrieves the passwords stored on the devices.
User Manual HHP460 Smart Manometer with Altimeter & Air Speed Test
Configuration
button displays a window with two
The first tab displays the Smart Manometer name or
the name you assigned to it.
Optional: this second tab displays the tethered sensor
name or the name you assigned to it.
yellow alert icon
to indicate you have
43 of 72