Altitude Correction In Feet (Meters) - Omega HHP460 User Manual

M20013 REL-0000 (2103)

Altitude Correction in Feet (Meters)

User Defined Altitude
This
elevation change from a map elevation reference or from a survey
trig marker elevation. Follow the on-screen instructions to set up
the HHP400 to display altitude based on data you enter.
1. Press the
display ALTITUDE CORRECTION IN FEET TAP √ TO CHANGE.
2. Press the
3. The HHP400 displays the following message:
ENABLE ALTITUDE OFFSET? √-YES X-NO
1. Pressing the
CORRECTION IN FEET TAP √ TO CHANGE screen.
2. Pressing the
options:
Note: When you
appears on the Home, the ALT FEET, and IAS MPH screens
to indicate that either an Altitude Offset or Sea Level Offset
has been set or both of Offsets have been set. Pressing the
Information
you can easily determine which offsets are active.
4. The HHP400 displays the following message:
ALT OFFSET IN FEET √ SAVES X CANCELS 0 CLEARS
1. Pressing the
the first digit and pressing the
the blinking cursor right or left. Enter your
data by using the arrow keys.
2. Information:
clears any numbers you entered after pressing the Up or
Down arrow keys.
User Manual HHP460 Smart Manometer with Altimeter & Air Speed Test
function is useful in determining an
Backward key three times from the home screen to
Accept (√ ) key to enter the change screen.
Cancel (X) key returns you to the ALTITUDE
Accept
(√) key displays
Enable the Altitude Offset, an asterisk (*)
key displays ON or OFF for each active offset so
Up Down
or arrows on the keypad changes
0 Clears refers to the
Altitude Offset
Right or Left arrows moves
Defined Altitude
Zero key. Pressing it
15 of 72