Table of Contents
Advertisement
M20013 REL-0000 (2103)
Keypad: Description of the keys
Name
Backward
Home
Forward
Units
Start
Stop
Up arrow
Left arrow
Zero & Tare
Right arrow
Down Arrow
Cancel or Esc
Accept
Power
Information
User Manual HHP460 Smart Manometer with Altimeter & Air Speed Test
Key
Description
•
It cycles backward through menu
options.
•
Home key returns you to the
Measurement and Units
•
Home key is disabled during tests
and edits
•
It cycles forward through menu
options.
•
Select a measurement unit.
•
Start key begins a test or data log.
•
Stop or Hold (Freeze) key.
•
It increases digits by one.
•
It switches between the P1 and P2
sensors displays.
•
It moves the blinking cursor one
space at a time to the left.
•
Zero
key resets pressure values to
zero.
•
It resets min max values.
•
It sets edit values to zero.
•
It resets relief valve test.
•
As a
Tare
key, it turns off or turns on
the Tare function.
•
It moves the blinking cursor one
space at a time to the right.
•
It decreases digits by one.
•
It switches between the P1 and P2
sensors displays.
•
Cancel
any editing or changes
without saving.
•
It also stops tests.
•
Accept
applies all editing and
changes, and then saves them.
•
It also stops tests.
•
Turns the Smart Manometer on or off.
•
Displays information about the Smart
Manometer, internal sensor, attached
Omega Tethered Sensors and the
firmware.
screen.
23 of 72
Advertisement
Table of Contents
