Table of Contents
Advertisement
1.1
Unpacking
Remove the packing list and verify that you have received all
equipment. If you have any questions, contact the Customer
Service Department nearest you.
Upon receipt of shipment, inspect the container and equipment for
any signs of damage. Note any evidence of rough handling in
transit. Immediately report any damage to the shipping agent.
The carrier will not honor any claims unless all shipping
material is saved for their examination. After examining and
removing contents, save packing material and carton in the
event reshipment is necessary.
Please ensure that a 9 Volt battery is included.
1.2 General Description
The hand held calibrator is a digital indicator for strain gage type
transducers such as load cells, torque sensors, or millivolt pressure
sensors. It provides excitation voltage for the transducer and
displays the readings on a liquid crystal display (LCD). The LCD
has a 3 1/2 active digits (0-1999 counts) and an additional dummy
zero if needed. The calibrator can display either the actual value of
the signal (tracking mode) or the peak value (peak mode). It
operates on a standard 9 Volt battery and provides an indication of
low battery.
S
ETUP
1
1
Advertisement
Table of Contents
