Platform Power Supplies; Power Cord Types And Order Codes - Extreme Networks ExtremeSwitching Virtual Services Platform 4450GSX-PWR+ Installation Manual

Platform power supplies

The VSP 4450GSX series supports both AC and DC power supplies. One power supply is installed
in the system.
You can install a redundant power supply to support additional power requirements or to provide
power redundancy.
The following table describes the VSP 4000 compatible AC and DC power supplies and their part
numbers (order codes). All the power supplies are EUED RoHS 5/6 compliant.
Note:
The 1000W AC power supply uses the IEC 60320 C16 AC power cord connector.
Use the order codes to order a replacement for the primary PSU or to order a redundant PSU for
your VSP 4000 system.
Note:
Power cords must be ordered separately. Ensure you order the correct power code for your
region. For more information, see
Table 2: Power supply order codes
VSP 4000 PSU
1000W AC POE+
power supply
300W DC power
supply

Power cord types and order codes

To connect AC power to the switch, you need an appropriate AC power cord as described in the
following table.
Table 3: Power cords for power distribution units
Order Code
700512240
700512242
August 2018
Power cord types and order codes
Usage
For use in VSP 4450GSX-PWR+ model.
For use in the VSP 4850GTS-DC, VSP 4450GSX-DC,
ERS5698TFD, 5650TD, and 5632FD.
DC connector included.
Length Power supply side
connector
3 m C15
3 m C15
Installing the Virtual Services Platform 4450GSX-PWR+
Platform power supplies
on page 11.
Part number
(order code)
AL1905A21-E6
AL1905005-E5
Power source Safety Approval
side connector
C14 USA
C14 International except
Japan and Taiwan
11