Using Wlan - Daikin Altherma 3 M User Reference Manual

5 | Operation

5.10.4 Using WLAN

User reference guide
52
Typical workflow
Using holiday mode typically consists of the following stages:
1 Setting the starting date and ending date of your holiday.
2 Activating the holiday mode.
To check if holiday mode is activated and/or running
If is displayed on the home screen, holiday mode is active.
To configure the holiday
1 Activate the holiday mode.
▪ Go to [7.3.1]: User settings > Holiday > Activation.
7.3.1
Activation
From
Till
▪ Select On.
2 Set the first day of your holiday.
▪ Go to [7.3.2]: From.
▪ Select a date.
▪ Confirm the changes.
3 Set the last day of your holiday.
▪ Go to [7.3.3]: Till.
▪ Select a date.
▪ Confirm the changes.
INFORMATION
Restriction: WLAN settings are only visible when a WLAN cartridge is inserted in the
user interface.
About the WLAN cartridge
The WLAN cartridge connects the system to the internet. As user you can then
control the system via the Daikin Residential Controller app.
This needs the following components:
a
b c
—
—
—
EBLA09~16DA + EDLA09~16DA
Daikin Altherma 3 M
4P620245-1 – 2020.06