Scheduled + Reheat Mode; To Change The Domestic Hot Water Temperature - Daikin Altherma 3 M User Reference Manual

5 | Operation

5.7.4 Scheduled + reheat mode

5.7.5 To change the domestic hot water temperature

User reference guide
34
▪ Initially, the DHW tank temperature is the same as the temperature of the
domestic water entering the DHW tank (example: 15°C).
▪ At 00:00 the DHW tank is programmed to heat up the water to a preset value
(example: Comfort = 60°C).
▪ During the morning, you consume hot water and the DHW tank temperature
decreases.
▪ At 14:00 the DHW tank is programmed to heat up the water to a preset value
(example: Eco = 50°C). Hot water is available again.
▪ During the afternoon and evening, you consume hot water again and the
DHW tank temperature decreases again.
▪ At 00:00 the next day, the cycle repeats.
In scheduled + reheat mode, the domestic hot water control is the same as in
scheduled mode. However, when the DHW tank temperature drops below a preset
value (=reheat tank temperature – hysteresis value; example: 35°C), the DHW tank
heats up until it reaches the reheat set point (example: 45°C). This ensures that a
minimum amount of hot water is available at all times.
Example:
T t
60°C
50°C
45°C
35°C
15°C
00:00
T Domestic hot water tank temperature
t
t Time
In Reheat only mode, you can use the tank temperature setpoint screen to read
out and adjust the domestic hot water temperature.
1 Go to [5]: Tank.
5
Tank
2 Adjust the domestic hot water temperature.
a
5
50
°C
Tank
a Actual domestic hot water temperature
b Desired domestic hot water temperature
1
2
3
07:00 14:00 21:00
b
+
–
4
5
t
EBLA09~16DA + EDLA09~16DA
Daikin Altherma 3 M
4P620245-1 – 2020.06