Leg Rests; Swing Away Leg Rests - Invacare Action 3 NG User Manual

Invacare® Action 3 NG
Front fitting
1. Push the armrest down and until the front release
button B snaps into its armrest socket hole.
2. Ensure button protrudes fully through socket hole.
Rear removing
1. Remove armrest from armrest bracket D by pulling
straight up on the armrest.
Rear fitting
1. Position armrest support C over rear armrest bracket D.
2. Push the armrest down until a clear "click" is heard
when it's locked into the armrest bracket D.
Adjusting the height
1. After loosening the fixing screw E with 5 mm Allen key
or alternatively the thumbscrew, if present.
2. Adjust the height and tighten the fixing screw E (5
Nm) or firmly tighten the thumbscrew, into the desired
position.
3. Perform the setting on both sides.

3.8 Leg rests

WARNING!
Risk of injury
– Never lift the wheelchair by the footrest
supports or leg rests.
26
CAUTION!
Risk of pinching or crushing fingers
There are swing mechanisms where you could
trap your fingers.
– Be careful when using, swinging, disassembling
or adjusting these mechanisms.
IMPORTANT!
Risk of damage to the leg rest mechanism
– Do not place anything heavy, or let children
sit on the leg rest.

3.8.1 Swing away leg rests

Swinging outwards
1. Activate the release lever A and swing the leg rests
to the outside.
1608467-E