Invacare Action 3 NG User Manual page 20

Invacare® Action 3 NG
Unfolding the backbrace
1. Fold the backbrace B upwards.
2. Align the backbrace B with the push handle and push it
down on the hand screw A.
3. Firmly tighten the hand screw A and make sure that
the TWO hand screws A are properly tightened.
It is important to ensure that the backbrace is
correctly fitted and engaged at all times when the
chair is in use. It should not be left hanging loose
(see label C on the backbrace).
20
Folding backbrace for the backrest
An optional folding backbrace is available to increase the
rigidity of the backrest on wheelchairs with large back
heights or widths.
CAUTION!
– Do not use the folding backbrace to lift or push
the wheelchair. It could break.
Folding the backbrace
1. Unlock the folding backbrace by pushing the joint A
slightly downwards.
2. Fold the backbrace downwards.
The folding backbrace will automatically release
when the chair is folded.
Unfolding the backbrace
1. Fold the backbrace upwards.
2. Lock the folding backbrace by pulling the joint A slightly
upwards.
1608467-E