Invacare Action 3 NG User Manual page 30

Invacare® Action 3 NG
Activating the anti-tipper
1. Release the spring button A and swivel the anti-tipper
downwards until it engages and the front release button
B snaps into the frame hole.
2. Ensure front release button B protrudes fully through
frame hole.
WARNING!
Risk of tipping
An activated anti-tipper can catch when
negotiating a step or an edge.
– Always deactivate the anti-tipper before driving
over a step or kerb.
Deactivating the anti-tipper
1. Release the spring button A and swivel the anti-tipper
upwards until it engages and the front release button B
snaps into the frame hole.
30
WARNING!
Risk of overturning
– Always advise the user if you deactivate the
anti-tippers.
There is a red label on the housing of the anti-tipper,
this label shows when the anti-tipper is inactivated.
When the anti-tipper is correctly activated, the red
label will be concealed.
Setting the height
WARNING!
Risk of overturning
– The adjustments of the anti-tipper must be
carried out by a qualified technician.
This adjustment is required with reference to the
position and diameter of the rear wheel as well as
the user conditions and his particular safety limits.
Make sure that the anti-tipper device is fitted
correctly on each side (if applicable), the spring
button A and fixation C must be locked into
position.
1608467-E