Startup; Outline; Network Setting - Mitsubishi Electric MR-J5-G User Manual

1.2

Startup

Outline

This chapter describes the setting procedure for CC-Link IE TSN. Refer to the following for startup of the servo amplifier.
MR-J5-G/MR-J5W-G User's Manual (Introduction)
MR-J5D-G User's Manual (Introduction)
Precautions
To ensure the safety of the system against unauthorized network access, take security measures such as using a firewall.

Network setting

Set GX Works3 as required for the servo amplifier network settings, then configure the network. Set the master station and
servo amplifier of CC-Link IE TSN according to the following procedure.
If an alarm has occurred, refer to the following.
MR-J5 User's Manual (Troubleshooting)
1.
Master station setting
Refer to the GX Works3 manual.
2.
IP address setting
Set the IP address with the rotary switches and parameter.
MR-J5-G/MR-J5W-G User's Manual (Introduction)
MR-J5D-G User's Manual (Introduction)
Refer to the following when setting with parameters.
Page 15 IP address setting function
3.
Network setting servo parameter setting
MR-J5-G/MR-J5W-G User's Manual (Parameters)
4.
Network connection procedure
Page 13 Network connection procedure
1 CC-Link IE TSN
12
1.2 Startup