Ip Address Setting Function - Mitsubishi Electric MR-J5-G User Manual

IP address setting function

IP addresses are delivered from the controller to servo amplifiers via CC-Link IE TSN.
Set the IP address required for CC-Link IE TSN communication from the following items. The IP address range is between
0.0.0.1 and 223.255.255.254. Set the IP address within the range.
[Pr. NPA01 IP address
setting]
"00000000h" (The rotary switch is
used.)
"00000001h" (Network
parameters are used.)
The initial value of the IP address is as follows.
Item
IP address
Subnet mask
Rotary switches IP address
(SW1/SW2)
00h 1st octet
2nd octet
3rd octet
4th octet
01h to FEh 1st octet
2nd octet
3rd octet
4th octet

FFh
 1st octet
2nd octet
3rd octet
4th octet
Use the value of/for [Pr. NPA02 IP address].
Use the 1st to 3rd octet values of [Pr. NPA02 IP address].
The setting value of the rotary switch (SW1/SW2) is used.
Not available.
Use the value of/for [Pr. NPA02 IP address].
Initial value
192.168.3.1
255.255.255.0
1 CC-Link IE TSN
15
1.3 Application function
1