Technical Specifications; Eqs Elite - Graco EcoQuip 2 EQs Series Instructions Manual

Technical Specifications

Technical Specifications

EQs Elite

EcoQuip 2 EQs and EQs Elite
Maximum Fluid Working Pressure
Operating Temperature
Recommended Compressor Size+
Blast Hose Size (supplied)
Abrasive Capacity*
Dry Weight
Wet Weight*
Pressure Pot Volume
Water Tank Volume
Air Inlet Connection†
Water Inlet Connection
*Abrasive capacity and wet weight was found using 80 grit garnet. Using coarser media or less dense media
will decrease weight.
† 2 in. ground boss adapter included in tool box (see Parts section of the EcoQuip 2 manual for more detail).
Air Supply Hose Minimum ID
185–600 CFM compressor and less than 100 ft
hose length
Over 600 CFM compressor or greater than 100
ft hose length
Sound Data**
Sound Pressure Level
Sound Power Level
Instantaneous Sound Pressure Level
**All readings were taken at the maximum system blast pressure 150 psi (10.3 bar, 1.03 MPa) from the
operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with ISO
9614-2.
+ See the Nozzle Selection Guide for information on how to properly select the blast nozzle based on
compressor pressure and flow output specifications.
Notes
All trademarks or registered trademarks are the property of their respective owners.
64
US
175 psi
35°–110° F
185–900 CFM
1.25 in. ID
880 lb
1070 lb
3120 lb
6.5 cubic feet
115 gallon
3/4 in. garden hose
connection
1.5 in. ID
2 in. ID
133 dB(A)
139 dB(A)
131 dB(C)
Metric
10.3 bar, 1.03 MPa
1.6°–43.3° C
5.24–25.5 m3/min
31.75 mm ID
400 kg
485 kg
1415 kg
184 liters
435 liters
1-1/2 npt
19 mm garden hose
connection
38 mm ID
51 mm ID
133 dB(A)
139 dB(A)
131 dB(C)
3A7467D