Operation
Clean the Water Tank
1. Perform the Pressure Relief Procedure procedure,
page 19.
2. Disconnect the water inlet hose.
3. Open the inlet ball valve (N) and drain.
4. Remove the tank drain.
5. Remove the tank lid and clean out with pressure
washer.
28
Use the Water Dose Meter
The water dose meter is a feature that allows the user to
adjust how wet the blast will be during operation.
1. Perform the Adjust Abrasive Media procedure,
page 20.
2. Adjust the water dose valve (S) to adjust how wet
the blast will be during operation.
3A7467D