Setup; Fill The Water Tank - Graco EcoQuip 2 EQs Series Instructions Manual
Trailer unit vapor abrasive blast system
Hide thumbs
Also See for EcoQuip 2 EQs Series:
- Operation, repair, and parts (74 pages) ,
- Instructions manual (70 pages)
Table of Contents
Advertisement
Setup
Setup
Fill the Water Tank
1. Fill the water tank with fresh water only, then open
the inlet ball valve (N).
2. Close the rinse ball valve (X) and abrasive ball valve
(M).
16
3. Turn the selector valve to OFF.
4. Disengage the emergency stop (Q).
NOTE: The water pump will not work unless the
Emergency Stop is disengaged.
M
3A7467D
Advertisement
Table of Contents
