York Millennium YCAS Series Installation Operation & Maintenance page 11

Section 6 – REACTIVITY DATA
Stability: Stable
Hazardous Polymerization:
Incompatible Materials:
Conditions to Avoid:
Hazardous Decomposition Products: Analogous compounds evolve carbon monoxide, carbon dioxide,
This product may degrade some paints and rubber materials.
Section 7 – HEALTH HAZARD DATA
Threshold Limit Value: Not established
Situations to Avoid: Avoid breathing oil mists
First Aid Procedures:
Ingestion: Consult physician at once. May cause nausea and diarrhea.
Inhalation: Product is not toxic by inhalation. If oil mist is inhaled, remove to fresh air and consult
physician.
To the best of our knowledge, the toxicological properties of these compounds have not been fully investigated.
Analogous compounds are considered to be essentially non-toxic.
Section 8 – PERSONAL PROTECTION INFORMATION
Respiratory Protection: Use in well ventilated area
Ventilation: Local exhaust
Protective Gloves: Strongly recommended, especially for prolonged exposure.
Eye/Face Protection: Goggles
Firefighters should use NIOSH/MNSA-approved self-contained breathing apparatus. Use water fog to cool
fire-exposed containers. USE WATER CAREFULLY NEAR EXPOSED/BURNING LIQUIDS. May cause frothing
and splashing of hot material.
Section 9 – SPILL OR LEAK PROCEDURES
In Case of Spill: Wear suitable protective equipment, especially goggles. Stop source of spill. Dike spill area. Use
absorbent materials to soak up fluid (i.e. sand, sawdust, and commercially available materials).
Wash spill area with large amounts of water. Properly dispose of all materials.
Section 10 – WASTE DISPOSAL METHODS
Incinerate this product and all associated wastes in a licensed facility in accordance with Federal, State,
and local regulations.
The information in this material safety data sheet should be provided to all who use, handle, store, transport, or are
otherwise exposed to this product. CPI believes the information in this document to be reliable and up to date as of
the date of publication, but makes no guarantee that it is.
YORK INTERNATIONAL
Will not occur
Strong oxidizers, caustic or acidic solutions
Excessive heat
and other unidentified fragments when burned. See Section 5.
FORM 201.18-NM4
1
11