Figure 6-2
The connecting cables are introduced into the GT640 terminal box through the cable glands
with threaded holes 2 x M72 x 2 and 2 x M20 x 1.5. The cable glands are not included in the
standard scope of supply.
You can find additional information here:
● Bringing cables into the terminal box GT640 with cable gland (Page 86)
● Connecting cables with cable lugs (Page 89)
● Connecting cables without cable lugs (Page 90)
6.3.2
Terminal box 1XB1621
Figure 6-3
The connecting cables are introduced into the 1XB1621 terminal box through the cable glands
with threaded holes 2 x M80 x 2 and 2 x M25 x 1.5. The cable glands are not included in the
standard scope of supply. The version with sealing insert with break-off ring is optional.
You can find additional information here:
● Bringing cables into the terminal box 1XB... with cable gland (Page 88)
● Connecting cables without cable lugs (Page 90)
● Connecting cables with cable lugs (Page 89)
See also
Bringing cables into the terminal box 1XB... with sealing insert with break-off ring (Page 87)
SIMOTICS FD 1LH1
Operating Instructions 01/2019
Terminal box GT640
Terminal box 1XB1621
Electrical connection
6.3 Terminal box
75