Selecting The Motor Type And Motor Data In The Starter Program; Figure 7-1 Selecting A Motor Type - Siemens SIMOTICS FD 1LH1 Operating Instructions & Installation Instructions
Low-voltage motor
Hide thumbs
Also See for SIMOTICS FD 1LH1:
Table of Contents
Advertisement
7.10.1
Selecting the motor type and motor data in the STARTER program
Prerequisites
● The motor is connected to the converter and is ready for operation.
● The converter must have at least software version 4.6.
● You have installed the STARTER software with at least version 4.3.1 with SSP, and you are
● The STARTER program has been started. You are in the "Configuration" dialog screen form.
Selecting motor parameters
1. Enter a name for the motor in the "Motor name" input field.
2. Select the "Enter motor data" option.
3. In the "Motor type" field, select the entry "[14] SIMOTICS FD induction motor series".
SIMOTICS FD 1LH1
Operating Instructions 01/2019
connected to the converter. You require SSP V4.6 for the SINAMICS G120P inverter.
Subsequent motor assignment is simplified by selecting a unique name.
Figure 7-1
Selecting a motor type
7.10 Setting the motor parameters at the converter
Start-up
105
Advertisement
Table of Contents
