Terminal Box 1Xb7740; Figure 6-7 Terminal Box 1Xb7740 - Siemens SIMOTICS FD 1LH1 Operating Instructions & Installation Instructions
Low-voltage motor
Hide thumbs
Also See for SIMOTICS FD 1LH1:
Table of Contents
Advertisement
Electrical connection
6.3 Terminal box
The connecting cables are introduced into the 1XB7731 terminal box through the cable glands
with threaded holes 2 x M72 x 2 and 3 x M25 x 1.5. The cable glands are not included in the
standard scope of supply.
You can find additional information here:
● Bringing cables into the terminal box 1XB... with cable gland (Page 88)
● Connecting cables with cable lugs (Page 89)
● Connecting cables without cable lugs (Page 90)
6.3.6
Terminal box 1XB7740
Figure 6-7
The connecting cables are introduced into the 1XB7740 terminal box through the cable glands
with threaded holes 4 x M80 x 2 and 3 x M25 x 1.5. The cable glands are not included in the
standard scope of supply.
You can find additional information here:
● Bringing cables into the terminal box 1XB... with cable gland (Page 88)
● Connecting cables with cable lugs (Page 89)
● Connecting cables without cable lugs (Page 90)
78
Terminal box 1XB7740
SIMOTICS FD 1LH1
Operating Instructions 01/2019
Advertisement
Table of Contents
