Samsung NX58 565 Series User Manual page 72

Maintaining your appliance
How to set the oven for self-cleaning
72 English
NX58H5 Series_AA_DG68-00526A-14_EN+MES+CFR_WEB.indb 72
• When Loc is shown in the display, it
indicates the door lock feature is on.
Press and hold the OFF/CLEAR pad for 3
seconds to unlock the oven controls.
1. Make sure the oven door is completely
closed.
2. Press the Self Clean pad on the oven
control panel.
Press the pad once for a 2-hour cleaning
cycle, twice for a 3-hour cleaning cycle,
or three times for a 4-hour cleaning
cycle.
Pressing the pad a fourth time will
reselect the 2-hour default time.
The display will show Clean, and the
Start indicator will blink under the
selected cleaning cycle time.
3. Press the START/SET pad to start the
cycle.
The display will show Clean and the
selected cleaning cycle time, and the
Lock icon will blink until the door is
locked. Then the Lock icon will stay
on until the cycle is over and the oven
temperature is below 350 °F (177 °C).
The oven temperature will rise and hold
the preset self-clean temperature for the
duration of the selected cleaning cycle.
The display will count down the cleaning
cycle in minutes and hours.
When the time elapses, the oven will
turn off and beep 6 times. End will show
in the display and the Lock icon will
blink. When the oven temperature falls
below 350 °F (177 °C), the door unlocks
and the Lock icon turns off.
4. Press the OFF/CLEAR pad.
The display will go back to showing the
time of day.
2020-06-23 오전 9:09:54