Samsung NX58 565 Series User Manual page 68

Maintaining your appliance
Hinge
lock
To replace the door
68 English
NX58H5 Series_AA_DG68-00526A-14_EN+MES+CFR_WEB.indb 68
2. Unlock the two hinge locks. Pull each
hinge lock down towards the door
frame to unlock it so they look like the
illustration to the right.
3. Close the door to the removal position,
approximately 5 degrees from vertical.
4. Firmly grasp both sides of the oven
door and lift the door up and out until
the hinge arms clear the slots in the
bottom of the oven door.
5. Carefully place the door in a safe
location.
1. Make sure hinge arms are unlocked and
in the removal position.
2. Firmly grasp both sides of the door.
3. While supporting the oven door, insert
both door hinge arms into the slots in
the bottom sides of the door frame.
When the door is held at about 5
degrees, the hinge arms will slide in and
down.
4. Completely open the oven door. If the
door will not fully open, the hinge arms
are not correctly inserted into the slots
Hinge in the bottom of the door.
lock
5. Lock both hinge locks. Push each lock
up against the front frame of the oven
cavity.
6. Close the door.
7. Reconnect power to the range.
2020-06-23 오전 9:09:52