Surface Cooking; Lighting A Gas Surface Burner; Manually Lighting A Gas Surface Burner; Flame Size Selection - Samsung NX58 565 Series User Manual

Surface cooking

Surface cooking
WARNING
BEFORE USING THE SURFACE BURNERS, make sure to follow all the safety
warnings and precautions listed on page 6. Failure to do so could result in product
damage, personal injury, and/or death.

Lighting a gas surface burner

Make sure all surface burners are positioned and assembled properly.
NOTE
We highly recommend using the left rear side burner for simmering tomato sauce
and right rear side burner for melting chocolate.

Manually lighting a gas surface burner

If a power failure occurs, the surface burners can still be lit manually.
NOTE
Use extreme caution when manually lighting a surface burner.
1. Hold a long gas grill lighter to the surface burner you want to light.
2. Push in and turn the control knob for that burner to the LITE position.
3. After the burner has lit, set the control knob and the burner to the desired
setting.
26 English
NX58H5 Series_AA_DG68-00526A-14_EN+MES+CFR_WEB.indb 26
1. Push in and turn the control knob to the
LITE position. You will hear a "clicking"
sound indicating the electronic ignition
system is working properly.
2. After the surface burner lights, turn the
control knob to adjust the power setting
of the surface burner and turn off the
electronic ignition system.

Flame size selection

WARNING
Flames larger than the bottom of the cookware will not result in faster heating,
but could result in a fire hazard and/or personal injury.
The flames on the burners should always stay under the cookware. The flames
should never extend beyond the bottom surface and/or up the sides of the
cookware.
Always watch the flames when adjusting the heat setting with the control knob(s).
The flames should always match the size of the cookware being used.

Gas surface burners and control knobs

Your gas range cooktop has five gas
burners. All sealed cooktop burners use
CENTER
LR RR
an open-port design which provides easy
assembly and accurate and dependable
operation. The different burner sizes ensure
LF RF
you have the proper heat source for the
desired cooking job.
The right rear side burner provides precise cooking performance for delicate foods
and foods that require low heat for long cooking times. The right rear side burner
lets you use the LO setting for a very low simmer setting.
The left rear side and center round burners are general-purpose burners that can
be used for most cooking. The HI to LO settings provide a wide range of cooking
temperatures to meet your cooking needs.
2020-06-23 오전 9:09:40