Samsung NX58 565 Series User Manual page 15

Free-standing gas range
Hide thumbs Also See for NX58 565 Series:
Table of Contents

Advertisement

Available languages

Available languages

Do not attempt to repair or replace any part of your range
unless it is specifically recommended in this manual. All
other service should be referred to a qualified technician.
This appliance must be properly grounded. Plug your
range into a 120-volt grounded outlet that is only used
for this appliance. Do not remove the grounding (third)
prong from the plug. Firmly plug the power cord into the
wall outlet. If you are not sure your electrical outlet is
grounded, it is your personal responsibility and obligation
to have a properly grounded, three-prong outlet installed
in accordance with local and national codes. Do not use a
damaged power plug or loose wall outlet. Do not use an
extension cord with this appliance. In addition, do not use
an adapter or otherwise defeat the grounding plug. If you
do not have a proper outlet or have any doubts about the
outlet, consult a licensed electrician.
NX58H5 Series_AA_DG68-00526A-14_EN+MES+CFR_WEB.indb 15
Locate the range out of kitchen traffic paths and drafty
locations to prevent poor air circulation.
This appliance should be positioned so that the power plug
is easily accessible.
Do not install in an area exposed to dripping water or
outside weather conditions.
Remove all packaging materials from the range before
operating it. These materials can ignite, causing smoke
and/or fire damage.
Install this appliance on a level and hard floor that can
support its weight. Synthetic flooring, like linoleum, must
withstand 180 °F (82 °C) temperatures without shrinking,
warping, or discoloring. Never install the range directly
over interior kitchen carpeting unless a sheet of 0.25"
plywood or a similar insulator is placed between the range
and carpeting.
SAVE THESE INSTRUCTIONS
English 15
2020-06-23 오전 9:09:38

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx58 560 seriesNx58 751 series

Table of Contents