TP-Link TL-R600VPN Configuration Manual page 52

Configuring Network
Follow these steps to configure static IP connection:
1) In the General section, check the box to enable IPv6 function, then click Save.
IPv6
2) In the Internet section, choose the Internet Connection type as Static IP, and configure
the corresponding parameters. Then click Save.
Internet
Connection Type
IPv6 Address
Default Gateway
Primary DNS/
Secondary DNS
Check the box to enable IPv6 function.
Choose Static IP as the connection type.
Enter the IPv6 address provided by your ISP.
Enter the default gateway provided by your ISP.
Enter the DNS address provided by your ISP.
IPv6 Configuration
Configuration Guide 44