Configuring Access Control - TP-Link TL-R600VPN Configuration Manual

Configuring Firewall
Allow packets with the
MAC addresses listed
below and deny the rest
Deny packets with the
MAC addresses listed
below and allow the
rest
Note:
MAC Filtering rules take effect on the LAN interface instead of the WAN interface.
2.4

Configuring Access Control

Choose the menu Firewall > Access Control > Access Control and click Add to load the
following page.
Figure 2-5 Access Control
This table displays the Access Control entries. Follow the steps below to add a new Access
Control entry.
1) Click Add and the following page will appear.
Figure 2-6 Access Control
Choose whether to select this filtering rule. With this rule selected, the
router will allow the packets with the MAC addresses in the MAC Filtering
List and deny other packets.
Choose whether to select this filtering rule. With this rule selected, the
router will deny the packets with the MAC addresses in the MAC Filtering
List and allow other packets.
Firewall Configuration
Configuration Guide 97