TP-Link TL-R600VPN Configuration Manual page 123

Configuring Behavior Control
Mode
Filtering Content
Effective Time
Status
Description
ID
2) In the General section, enable URL filtering. Click Save.
Select the filtering mode.
Keywords: If a website address contains any of the keywords, the
policy will be applied to this website.
URL Path: If a website address is the same as any of the entire
URLs, the policy will be applied to this website.
Add filtering contents. Use the Enter key, Space key, "," or ";" to
divide different filtering contents.
"." means that this rule will be applied to any website. For example,
if you want to allow website A and deny other websites, you can
add an Allow rule with the filtering content "A" and add a Deny
rule with the filtering content ".". Note that "." rule should have the
largest ID number, which means that it has the lowest priority.
Select the effective time. The effective time referenced here can
be created on the Preferences > Time Range page.
Check the box to enable the rule.
Enter a brief description for the group.
Specify a rule ID. A smaller ID means a higher priority. This value
is optional. The newly added rule without this value configured
will get the largest ID among all rules, which means that the newly
added rule has the lowest priority.
Behavior Control Configuration
Configuration Guide 115