Optional) Configuring The L2Tp Users - TP-Link TL-R600VPN Configuration Manual

Configuring VPN

3.5 (Optional) Configuring the L2TP Users

Choose the menu VPN> Users > Users and click Add to load the following page.
Figure 3-5 Configuring the L2TP User
Follow these steps to configure the L2TP User:
1) Specify the account name and password of the L2TP User.
Account Name
Password
2) Specify the protocol as L2TP and configure other relevant parameters according to
your actual network environment.
Protocol
Local IP
Address
IP Address
Pool
DNS Address
Specify the account name used for the VPN tunnel. This parameter should be the
same with that of the L2TP client.
Specify the password of user. This parameter should be the same with that of the
L2TP client.
Specify the protocol for the VPN tunnel. There are two types: L2TP and PPTP.
Specify the local IP address of the tunnel. You can enter the LAN IP of the local
device.
Specify the IP address pool from which the IP address will be assigned to the VPN
client. The IP Pool referenced here can be created on the Preferences > VPN IP
Pool page.
Specify the DNS address to be assigned to the VPN client (8.8.8.8 for example).
L2TP Configuration
Configuration Guide 136