TP-Link TL-R600VPN Configuration Manual page 161

Configuring VPN
mode LAN-to-LAN as the network is connected to the other network, specify the max
connections as 3, then click OK.
Figure 5-21 Configuring the VPN User
5) Choose the menu Tramsmission > NAT > Multi-Nets NAT to load the configuration
page, and click Add. Specify the entry name as VPN_to_Internet, and choose WAN1 as
the outgoing interface. Specify the LAN subnet (192.168.0.0) on which the employees
are as the Source IP Range, Keep Enable selected as the Status of this entry. Click OK.
Figure 5-22 Adding the Multi-Nets NAT Entry
 Configuring the Remote PC
For remote PC, use Windows built-in PPTP software or third-party PPTP software to
connect to PPTP server. For more information, you can refer to our official website:
http://www.tp-link.com/us/faq-1629.html
Configuration Examples
Configuration Guide 153