Installation
The installation of the G2257A Sample Capacity Extension consists of the
following procedures:
• Installing the Automation Interface in the Well-plate Sampler,
• Setting up the Well-plate Handler,
• Calibrating the Well-plate Handler positions,
• Installing and adjusting the optional fixed barcode reader,
• Connecting the optional hand-held barcode reader.
Installing the Automation Interface
1 Unpack the autosampler (G1367A or G1377A).
2 Remove the front door from the autosampler (see
Figure 2
3 Remove the funnel (see
1100 Series Sample Capacity Extension
Removing the front door of the Autosampler
Figure
Figure
3).
Installation
2
2).
11