Display Color Selection Menu; Figure 3.11 Flow Chart For Display Color Selection - Omega i Series User Manual

3.2.12 Display Color Selection Menu

This submenu allows the user to select the color of the display.
Figure 3.11 Flow Chart for Display Color Selection Menu
ENTER DISPLAY COLOR SELECTION MENU:
Press a
Press d
Press a
Press d
NORMAL COLOR DISPLAY SUBMENU:
Press d
Press b
Press d
The menu below allows the user to change the color of display when alarm is
triggered.
ALARM 1 DISPLAY COLOR SUBMENU:
Press d
Press b
Press d
1) Press a , if necessary, until CNFG prompt appears.
2) Display advances to INPT Input Menu.
3) Press a , if necessary, until display advances to COLR
Display Color Selection Menu.
4) Display advances to N.CLR Normal Color Submenu.
5) Display flashes the previous selection for "Normal Color".
6) Scroll through the available selections: GRN , RED or AMBR .
7) Display shows STRD stored message momentarily and then
advances to 1.CLR only, if it was changed, otherwise press a to
advance to 1.CLR Alarm 1 Display Color Submenu.
8) Display flashes previous selection for "Alarm 1 Color Display".
9) Scroll through the available selections: GRN , RED or AMBR .
10) Display shows STRD stored message momentarily and then
advances to 2.CLR only, if it was changed, otherwise press a to
advance to 2.CLR Alarm 2 Display Color Submenu.
41