Alarm 2 Menu; Figure 3.6 Flow Chart For Alarm 2 - Omega i Series User Manual

3.2.7 Alarm 2 Menu

ENTER ALARM 2 MENU:
Press a
Press d
Press a
Press d
ALARM 2 ENABLE/DISABLE SUBMENU:
Press d
Press d
The remaining Alarm 2 menu items are identical to Alarm 1 Menu.
Modifying Alarm Settings will not reset the instrument.
Figure 3.6 Flow Chart for Alarm 2 Menu
1) Press a , if necessary, until CNFG prompt appears.
2) Display advances to INPT Input Menu.
3) Press a , if necessary, until display advances to ALR2 Alarm
2 Menu.
4) Display advances to Alarm 2 ENBL Enable or DSBL Disable
Submenu.
5) Display flashes previous selection. Press b until ENBL
displays to use Alarm 2.
6) Display shows STRD stored message momentarily and then
advances to ABSo only if it was changed, otherwise press a to
advance to ABSo Absolute/Deviation Submenu.
If DSBL Alarm 2 Disabled was selected, all submenus of Alarm 2
will be skipped and meter advances to R.ADJ Cold Junction
(C.J.) Reading Adjust Menu.
29