Drive System Maintenance; Checking The Tire Pressure - Toro 74841 Operator's Manual

Figure 48
1. 30 amp
2. 25 amp
1 2 3
4
G015037
3. Open accessory slot
4. Fuse block
Drive System
Maintenance

Checking the Tire Pressure

Service Interval: Every 25 hours—Check tire pressure.
Maintain the air pressure in the front and rear tires as
specified. Uneven tire pressure can cause uneven cut.
Check the pressure at the valve stem (Figure 49). Check
the tires when they are cold to get the most accurate
pressure reading.
Refer to the maximum pressure suggested by the tire
manufacturer on the sidewall of the caster wheel tires.
Inflate the rear drive wheel tires to 13 psi.
1. Valve stem
40
Figure 49