Drive System Maintenance; Checking The Tire Pressure - Toro TimeCutter HD X5450 Operator's Manual

Drive System
Maintenance

Checking the Tire Pressure

Service Interval: Every 25 hours—Check tire pressure.
Maintain the air pressure in the front and rear tires as
specified. Uneven tire pressure can cause uneven cut. Check
the pressure at the valve stem (Figure 57). Check the tires
when they are cold to get the most accurate pressure reading.
Refer to the maximum pressure suggested by the tire
manufacturer on the sidewall of the caster wheel tires.
g190589
Figure 56
Inflate the front caster wheel tires to 103 kPa (15 psi).
1. Charge circuit (25 A)
Inflate the rear drive wheel tires to 90 kPa (13 psi).
g000554
Figure 57
1. Valve stem
40