Fuel System Maintenance; Replacing The Fuel Filter - Toro 74841 Operator's Manual

Zero-turn-radius riding mower
Hide thumbs Also See for 74841:
Table of Contents

Advertisement

Fuel System
Maintenance
DANGER
In certain conditions, gasoline is extremely
flammable and highly explosive. A fire or explosion
from gasoline can burn you and others and can
damage property.
• Perform any fuel related maintenance when the
engine is cold. Do this outdoors in an open area.
Wipe up any gasoline that spills.
• Never smoke when draining gasoline, and stay
away from an open flame or where a spark may
ignite the gasoline fumes.

Replacing the Fuel Filter

Service Interval: Every 100 hours/Yearly (whichever
comes first) (more often under dusty,
dirty conditions).
1. Disengage the blade control switch (PTO), move the
motion control levers to the neutral lock position,
and set the parking brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Allow the machine to cool down.
4. Raise the seat and locate the fuel filters as shown in
Figure 44.
1
2
5
4
Figure 44
1. Fuel line from tank
2. In-line Fuel filter
3. Flow direction arrow
3
g017723
4. Fuel line to engine
5. Hose clamp
5. Squeeze the ends of the hose clamps together and
slide them away from the filter (Figure 45).
G008963
1. Fuel filter
2. Hose clamp
6. Remove the filter from the fuel lines.
7. Install a new filter with the flow direction arrow
coming from the fuel tank and pointing to the
engine. Move the hose clamps close to the filter
(Figure 44) to secure it in place.
37
1 2
3
Figure 45
3. Fuel line

Advertisement

Table of Contents
loading

This manual is also suitable for:

Titan zx4820

Table of Contents