Positioning The Seat; Adjusting The Motion Control Levers - Toro 74841 Operator's Manual

Positioning the Seat

The seat can move forward and backward. Position the
seat where you have the best control of the machine
and are most comfortable.
While sitting in the operator's position, raise the seat
adjustment lever slightly and move the seat forward or
backward to the desired position (Figure 30).
G010232
Figure 30
1. Adjustment lever
Adjusting the Motion Control
Levers
Adjusting the Height
The motion control levers can be adjusted higher or
lower for maximum operator comfort.
1. Remove the 2 bolts and 2 washers holding the
2. Move the control lever to the next set of holes.
1
1. Control arm shaft
2. Control lever
3. Slotted, upper hole
3. Repeat the adjustment for the opposite control
27
control lever to the control arm shaft (Figure 31).
Secure the lever with the 2 bolts and 2 washers
(Figure 31).
1
G014970
Figure 31
lever.
2
3
4
4. Washer
5. Bolt