Planar QE Series User Manual page 8

Examples
Command
brightness- [CR]
gain = 101 102 103 [CR]
gain(current red)+
gain(zone.1, all) = 104,105,106
ipv4.address(static)="10.15.0.220" [CR]
reset(user) [CR]
reset(user) [CR]
aspect? [CR]
aspect# [CR]
aspect=fill [CR]
aspect=3 [CR]
brightness @@ [CR]
fake.command = 1 [CR]
brightness(zone.999) = 100 [CR]
brightness="new value" [CR]
model.id = 1 [CR]
display.name = "Name containing \"
and \\"
power.on.delay = .1
8
Response
BRIGHTNESS:100 [CR]
GAIN:101 102 103 [CR]
GAIN(CURRENT RED):102
GAIN(ZONE.1 ALL):104 105 106
IPV4.ADDRESS(STATIC)="10.15.0.220"
[CR]
RESET(USER)@ACK [CR]
RESET(USER)^NAK [CR]
ASPECT:AUTO [CR]
ASPECT:0 [CR]
ASPECT:FILL [CR]
ASPECT:3 [CR]
BRIGHTNESS!ERR 1 [CR]
FAKE.COMMAND:ERR 3 [CR]
BRIGHTNESS(ZONE.999)!ERR 4 [CR]
BRIGHTNESS!ERR 5 [CR]
MODEL.ID!ERR 6 [CR]
DISPLAY.NAME:"Name containing \"
and \\"
POWER.ON.DELAY:0.1
Planar QE Series RS232 User Manual
Notes
Decrements the current Brightness
value
Example command with multiple
operators (sets Red Gain to 101, Green
Gain to 102 and Blue Gain to 103, on
the current zone)
Increments the Red Gain on the current
zone
Example command with multiple
modifiers, multiple operators and
different separators between the
modifiers and operators (sets Red Gain
to 104, Green Gain to 105 and Blue
Gain to 106, on Zone 1)
Example command with a string
operator
Example action command (no operator
or operand)
Example action command that cannot
be processed at this time
The name for the Aspect Ratio setting
value is returned
The number for the Aspect Ratio
setting value is returned
Sets the Aspect Ratio to Fill
Also sets the Aspect Ratio to Fill
Example of an invalid syntax ("@@" isn't
a valid operator)
Example of an invalid opcode
("FAKE.COMMAND" doesn't exist)
Example of an invalid modifier
("ZONE.999" isn't a valid modifier for
"BRIGHTNESS")
Example of an invalid operand (the
Brightness command doesn't accept a
string operand)
Example of an invalid operator (cannot
write to this command)
The name will appear on the remote
monitor as Name containing " and \
Example of a fixed point operand. Sets
the Power On Delay to 0.1 seconds.