Planar QE Series User Manual page 40

Installing the QE Series USB drivers
Manually installing the USB drivers
If the automatic USB driver installation doesn't succeed, you can follow the steps
below to manually install the USB drivers. The USB flash drive in your accessory kit
contains the USB drivers for manual installation.
1
2
3
4
40
Plug in the USB cable to your computer and to the QE Series panel.
Windows will detect the new hardware and attempt to install the drivers on its
own. If you do not see the "Installing device driver software" message, then the
driver installation previously failed. Skip to step 5.
If driver installation succeeds, you will see a message like the one shown below. If
so, driver installation is complete.
If Windows' attempt at installing the drivers fails, you will need to manually install
the drivers using the steps below.
Planar QE Series RS232 User Manual