Planar QE Series User Manual page 22

RS232 Codes
Command
Setting
Code
Image PAN
Position
IP Address IPV4.ADDRESS
IR Code IR.CODE
IR Remote IR.LOCK
Lock
Key KEY
Keypad Lock KEY.LOCK
Layout LAYOUT
Local LOCAL.DIMMING
Dimming
22
Modifiers
502 =?+- Mod 1: Zone
0 = ZONE.1
1 = ZONE.2
2 = ZONE.3
3 = ZONE.4
253 =
ALL.INPUT
254 = ALL
254 =
ALL.ZONE
255 =
CURRENT
Mod 2:
Direction
0 = X
1 = Y
255 = ALL
[None = ALL]
1205 =? 0 = STATIC
[None =
Current (for
reads only]
[None =
STATIC (for
writes only]
1210 =?+-
1202 =?
1200 =
1201 =?
103 =?+-
1415 =?+-
Planar QE Series RS232 User Manual
Operands
-1000 ~ 1000 No [For horizontal position on Zone 1]
PAN(ZONE.1, X)=0
PAN(ZONE.1 X):0
[For horizontal and vertical position on the
current zone: Horizontal Position = 10,
Vertical Position = 20]
PAN(CURRENT)=10 20
PAN(CURRENT):10 20
String Yes [Read the current IP address value]
NETWORK.DNS1?
NETWORK.DNS1:"10.15.0.60"
[Write the DNS server 1 for static IP]
NETWORK.DNS1(STATIC)="192.168.12.12"
NETWORK.DNS1(STATIC):"192.168.12.12"
0-65535 Yes IR.CODE=12345
IR.CODE:12345
0 = DISABLE Yes IR.LOCK=ENABLE
1 = ENABLE IR.LOCK:ENABLE
[See separate Yes [To send the MENU key]
table] KEY=MENU
KEY:MENU
0 = DISABLE Yes KEY.LOCK=ENABLE
1 = ENABLE KEY.LOCK:ENABLE
0 = SINGLE No [To change to Quad layout]
12 = QUAD LAYOUT(DUAL)=QUAD
LAYOUT(DUAL):QUAD
0 = OFF No LOCAL.DIMMING=ON
1 = ON LOCAL.DIMMING:ON
Example
For the 'X' modifier, see
Main -> Image Adjust -> Image
Position -> Move Horizontal.
For the 'Y' modifier, see
Main -> Image Adjust -> Image
Position -> Move Vertical.
See Main -> Advanced
Settings -> Network -> IP
Address
See Menu -> Advanced
Settings -> System Settings ->
IR Remote ID Code
See Menu -> Advanced
Settings -> System Settings ->
IR Remote Lock
See separate table on page 32
for key codes
See Menu -> Advanced
Settings -> System Settings ->
Keypad Lock
See Main -> Inputs and
Views -> Multi-Source View
See Main -> Inputs and
Views -> Multi-Source View ->
Advanced Layouts
See Main -> Advanced
Settings -> Backlight -> Local
Dimming
Notes