Planar QE Series User Manual page 25

Command
Setting
Code
OSD Close OSD.CLOSE
OSD ORIENTATION
Rotation
OSD Status OSD.STATUS
OSD OSD.TIMEOUT
Timeout
OSD OSD.
Transpar- TRANSPARENCY
ency
Overscan OVERSCAN
Pixel Orbit PIXEL.ORBIT
Power On POWER.ON.DELAY
Delay
Modifiers
1310 !
1302 =?+- 0 = LANDSCAPE
1 = PORTRAIT
1308 ? 0 = DISABLE
1 = ENABLE
1304 =?+- 0 = OFF
10 =
10.SECONDS
30 =
30.SECONDS
60 =
60.SECONDS
120 =
120.SECONDS
240 =
240.SECONDS
1303 =?+- 0-5
501 =?+- Zone 0-20
0 = ZONE.1
1 = ZONE.2
2 = ZONE.3
3 = ZONE.4
253 =
ALL.INPUT
254 = ALL
254 =
ALL.ZONE
255 =
CURRENT
[None =
CURRENT]
1906 =?+- 0 = OFF
1 = ON
1420 =?+- Unsigned fixed
point
0.0-10.0
Planar QE Series RS232 User Manual
Operands
No OSD.CLOSE
OSD.CLOSE@ACK
No ORIENTATION=LANDSCAPE
ORIENTATION:LANDSCAPE
No OSD.STATUS?
OSD.STATUS=ENABLE
No OSD.TIMEOUT=60.SECONDS
OSD.TIMEOUT:60.SECONDS
No OSD.TRANSPARENCY=3
OSD.TRANSPARENCY:3
No [For Zone 1]
OVERSCAN(ZONE.1)=0
OVERSCAN(ZONE.1):0
[For the current zone]
OVERSCAN=5
OVERSCAN:5
No PIXEL.ORBIT=ON
PIXEL.ORBIT:ON
Yes POWER.ON.DELAY=1.4
POWER.ON.DELAY:1.4
Example
Forces any menus or message
boxes that are currently on
screen to close
See Main -> Advanced
Settings -> Menus and
Messages -> OSD Rotation
Indicates whether the OSD
(menu, message box or
confirmation dialog) is
currently being shown on the
display
See Main -> Advanced
Settings -> Menus and
Messages -> OSD Timeout.
Numeric value is in seconds
and can be used to program
any delay value.
See Main -> Advanced
Settings -> Menus and
Messages -> OSD
Transparency
See Main -> Image Adjust ->
Overscan
See Main -> Advanced
Settings -> System Settings ->
Pixel Orbit
See Main -> Advanced
Settings -> Power -> Power On
Delay
RS232 Codes
Notes
25