RS232 Codes
Command
Setting
Code
Noise
NOISE.REDUCTION
Reduction
Notification
NOTIFICATION.
Event
EMAIL
NTP Server
NETWORK.NTPSER
VER
Offset
OFFSET
24
Modifiers
205
=?+-
Zone
0 = ZONE.1
1 = ZONE.2
2 = ZONE.3
3 = ZONE.4
253 =
ALL.INPUT
254 = ALL
254 =
ALL.ZONE
255 =
CURRENT
[None =
CURRENT]
1222
=?
Event
0 = POWER.
STATE.
CHANGED
1 = ERROR.
OCCURRED
2 = SOURCE.
DETECTED
3 =
SOURCE.LOST
4 = SOURCE.
SELECTED
1214
=?
210
=?+-
Mod 1: Zone
0 = ZONE.1
1 = ZONE.2
2 = ZONE.3
3 = ZONE.4
253 =
ALL.INPUT
254 = ALL
254 =
ALL.ZONE
255 =
CURRENT
[None =
CURRENT]
Mod 2: Color
0 = RED
1 = GREEN
2 = BLUE
255 = ALL
[None = ALL]
Planar QE Series RS232 User Manual
Operands
0 = OFF
No
[For Zone 1]
1 = LOW
NOISE.REDUCTION(ZONE.1)=OFF
2 = MEDIUM
NOISE.REDUCTION(ZONE.1):OFF
3 = HIGH
[For the current zone]
NOISE.REDUCTION=LOW
NOISE.REDUCTION:LOW
Op 1: Enable
Yes
NOTIFICATION.EMAIL(SOURCE.DETECTED)=
0 = DISABLE
ENABLE, "test@planar.com", "Your custom
1 = ENABLE
message here"
NOTIFICATION.EMAIL(SOURCE.DETECTED):EN
Op 2: Recipients
ABLE "test@planar.com" "Your custom
List String
message here"
Op 3: User
Message String
String
Yes
NETWORK.NTPSERVER="pool.ntp.org"
NETWORK.NTPSERVER:"pool.ntp.org"
For RED, GREEN
No
[For red offset on Zone 1]
and BLUE
OFFSET(ZONE.1, RED)=50
modifiers, one
OFFSET(ZONE.1 RED):50
operand:
0-100
[For all three offsets on the current zone:
Red Gain = 51, Green Gain = 52, Blue Gain =
For ALL
53]
operand, three
OFFSET=51 52 53
operands:
OFFSET=51 52 53
Red Offset: 0-
100
Green Offset: 0-
100
Blue Offset: 0-
100
Example
See Main -> Image Adjust ->
Noise Reduction
See Remote Monitoring
Software -> Notifications ->
Notification Events
Selects the NTP server to be
used with the Use Network
Time setting.
Default = "0.pool.ntp.org"
See Main -> Image Adjust ->
Red/Green/Blue Offset.
ALL modifier adjusts all three
offsets at the same time.
The first modifier can only be
missing if both modifiers are
missing.
Notes