Setting The Size Conversion Factor - Kyocera ECOSYS M6026cdn Service Manual

Item No.
U332

Setting the size conversion factor

Description
Rate: Setting a factor to convert a non-standard size paper to A4/Letter. The coefficient set here
is used to convert the black ratio in relation to the A4/Letter size and to display the result in user
simulation.
Mode: Make settings on the color copy and color print coverage counter displays, as well as the
coverage threshold.
Method
1. Press the start key.
2. Select the item to set.
Rate
Mode
Level 1
Level 2
Setting: [Rate]
Purpose: To set the coefficient for converting the black ratio for nonstandard sizes in relation to
the A4/Letter size.
1. Change the setting using the +/-keys or numeric keys.
Display
Rate
2. Press the start key. The value is set.
Setting: [Mode]
Purpose: Make settings on the color copy and color print color/coverage counter displays.
1. Select the mode.
0
1
Initial setting: 0
* : If '0' has been changed to '1', revert the U260 feed/eject counter switch to its initial state
(Eject).
2. Press the start key. The setting is set.
Setting: [Level 1/2]
Purpose: Setting the coverage thresholds to segment the color count depending on the density
level of 1, 2, and 3, for the counters of color copying and color printing.
* : The coverage threshold will be used to categorize the following counters when using
U920.
Color Copy(H), Color Copy(M), Color Copy(L)
Color Prn(H), Color Prn(M), Color Prn(L)
Display
Size coefficient
Toggling full-color count and color coverage count display
Low coverage threshold value
Middle coverage threshold value
Description
Size coefficient
Display
Full-color count display
Color coverage count display
Description
Description
Setting range
0.1 to 3.0
Description
1-3-35
2PV/2PW
Initial setting
1.0