Contents Of The Maintenance Mode Items; Outputting An Own-Status Report - Kyocera ECOSYS M6026cdn Service Manual

(3) Contents of the maintenance mode items

Item No.
U000

Outputting an own-status report

Description
Outputs lists of the current settings of the maintenance items and paper jam and service call
occurrences. Outputs the event log. Also sends output data to the USB memory.
Purpose
To check the current setting of the maintenance items, or paper jam or service call occurrences.
Before initializing or replacing the backup RAM, output a list of the current settings of the mainte-
nance items to reenter the settings after initialization or replacement.
Method
1. Press the start key.
2. Select the item to be output using the cursor up/down keys.
Display
Maintenance
User Status
Svc Status
Event
NW Status
All
3. Press the start key. A list is output.
Method: Send to the USB memory
1. Press the power key on the operation panel, and after verifying the main power indicator has
gone off, switch off the main power switch.
2. Insert USB memory in USB memory slot.
3. Turn the main power switch on.
4. Enter the maintenance item.
5. Press the start key.
6. Select the item to be send.
7. Select [Text] or [HTML].
Display
Print
USB (Text)
USB (HTML)
8. Press the start key.
Output will be sent to the USB memory.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Output list
List of the current settings of the maintenance modes
Outputs the user status page
Outputs service status page
Outputs the event log
Outputs network status page
Outputs the all reports
Output list
Outputs the report
Sends output data to the USB memory (text type)
Sends output data to the USB memory (HTML type)
1-3-6
2PV/2PW